Sunday, November 1, 2009

Saw Bench


Catching up on posts after spending time in the shop, and figuring out how to D/L photos on this new iMac, I wanted to share my version of the saw bench on Dan's workshop. 48" long, 15" wide, and 19" high, I added an additional feature of the bench hold fast hole. I had to add a thicker block underneath for a better grip, works great. Thought a lot about the overall length and settled on 48" based on space in the shop and the typical sized rough boards I cut. Made from scraps found around the shop.
at

4 comments:

  1. AnonymousNovember 4, 2009 at 1:58 PM

    I just added your blog to the blog aggregator on my website at www.unpluggedshop.com

    When you post a new article, within two to three hours, my site should pick up the article and display the headline linking back to your site so people can read the article on your site.

    Let me know if you have any questions or concerns. I think my site users will really like your site.

    Thanks,
    Luke Townsley
    www.unpluggedshop.com

    ReplyDelete
  2. Rick LasitaNovember 4, 2009 at 5:22 PM

    Thanks Luke, I appreciate the link

    ReplyDelete
  3. Extremely AverageFebruary 2, 2010 at 11:36 PM

    I found your blog through a similar link, but on The Taylor Garage. I am glad I did. Your work is lovely.

    ReplyDelete
  4. Rick LasitaFebruary 3, 2010 at 7:55 PM

    Well, thanks EA. I try and appreciate the comments. The Taylor Garage site is real nice as well, worth adding to my blog roll as well as your site.

    ReplyDelete